Hyperlox®

Hyperlox is ideal for processing difficult-to-machine materials on a daily basis.

Created from 2nd generation AITiN supernitride, this innovative nanocomposite coating increases both tool performance and overall machining capacity.

Colour: Black; 
Microhardness Temperature (°C): 3,700; 
Maximum Application: 1,100; 
Coating Structure: Nanocomposite


Case Study - 1

Application: 2FL, Ø2.5 mm Tapered Endmill
Part:
Inconel Material - Turbine Air Slots
Current Tool Life:
3 Slots (2100mm Total Length)
     Speed - 3000 rpm
     Feed - 175 mm/min
Failure Mode:
Tool breakage
Coating:
Hyperlox
Results:
Niagara Tools Endmill coated with Hyperlox
      Tool Life - 7 Slots (5600 mm Total Length)
     Speed - 3000 rpm
     Feed - 200 mm/min
Improvement:
260% increase in tool life


Case Study - 2

Application: HSS Gear Hob
Part:
Flex Plate
Measured Wear:
0.0183" (Standard Coated Hob)
Failure Mode:
Current tool wear reduces Hob life
Coating:
Hyperlox
Results:
Niagara Tools Reground and Hyperlox Coated Hob
     Measured Wear Post Production - 0.0107"
     Feed - 200 mm/min
Improvement:
40% decrease in measured wear

« Go Back